SIM CARD size and type
The reference station is equipped with a SIM card slot with standard dimensions. Before inserting the SIM
card into the device, disable the PIN lock.
If a prepaid SIM card is used, make sure that the internet package is active and the account is charged with the appropriate amount.
When using reference station in INDIVIDUAL MODE a SIM card with a fixed IP address is required for
the correct operation of the reference station. For operation in GOTRACK-RTK.COM MODE fixed public
IP address is not needed.
Data transfer is approximately 1 kb/s.
If base station is used in individual mode then data trasfer has to be multiplied by the number of connected clients.

Remove cover carefully. Use torx or Allen kay screwdriver for these 6 screws. Please check carefully which type of screws are used for theat cover.
When closing back check rubber gasket if it is the right place.

Remove cover carefully. SIM card holder will be clearly visible.
-
eSpray / eSpray GSM / eSpray GPS Assist
- PIN codes for AutoDrive / eSpray GPS Assist computer
- Sprayer computer - home screen
- Create spraying program
- Spraying program - edit
- Spraying program - select
- Spraying program - delete
- Joystick and section button control
- First start
- Tank filling
- Correction source
- Speed settings
- Pressure settings
- Flowmeter
- Row width adjustment
- Operation of the third section
- Speed simulation
- Pressure settings - sensor calibration
- eSpray controler pinout and harness
- SIM card installation
- Sprayer module installation
- Sprayer computer installation
- Installation guidelines
- Accessories and additional equipement
- Kit components
- Electric valves connection
- Speed sensor installation
- Pressure sensor installation
- Temperature sensor installation
- Flowmeter connection
- Tank level connection - optional
- Fan sprayer tower light connection
- Application rate
- Valves requirements
- LTE (GSM) settings
- PIN for the menu
- Remote support
- Show Remaining Articles (21) Collapse Articles
-
Remote Control
-
EHR - Electronic hitch controler
- No articles
-
Line Assist Pro
- No articles
-
Line Assist for platforms
- No articles
-
AutoDrive
- PIN codes for AutoDrive / eSpray GPS Assist computer
- Quick guide of the AutoDrive system
- Calibration after AutoDrive system installation
- LTE (GSM) settings
- Correction source
- GNSS Receiver configuration
- Safety settings
- LIDAR basic sensor
- Implement / machine settings
- Route recording - spraying
- Autonomous spraying
- Mowing - route recording
- Route recording with mower
- Autonomous grass mowing
- Speed management
- Starting revs
- Constant operating revs
- Revs controlling - Fendt Vario
- Alarms
- Turn definition
- Brake drive calibration
- Remote support
- GNSS status menu
- IMU settings verification
- ROI settings for ODC (Obstacle Detection Camera)
- ROI settings for ODC camera
- Show Remaining Articles (11) Collapse Articles
-
RTK Base station
-
GOtrack Farm Manager
- No articles