Starting revs
Starting revs settings are related to the engine RPM level when tractor is standtill and starts to move. This functionality is usefull especially in situations when tractor is hooked up with heavy implement i.e. sprayer with full tank. When starting revs are set above 0% it starting sequence is:
- Countdown,
- RPM increase to the Starting revs level,
- PTO engagement (if it set to automatic control),
- Hitch position change (if set to automatic control),
- Moving from standstill.
Starting revs level will be used until Deactivation speed condition is fulfilled. It means when this speed is esceeded.
In this example when tractor drives less then 1 km/h RPM level will be constant and it will be 30% of GOtrack system RPM range.
When tractor drives more than 1 km/h, RPM control will change to normal. It means that over 1 km/h RPM level will be regulated automatically related to the demanded speed from Speed management menu.
When low gear is selected and Deactivation speed is high then it may happen that deactivation speed is not reached and system will not switch to automatic RPM control dependent on the demanded speed.